← Guides

What should a cosmetics batch record review cover under ISO 22716?

By Savi C., Co-Founder · Published Nov 16, 2026

Why ISO 22716 is the yardstick

ISO 22716 is a guideline standard for the production, control, storage and shipment of cosmetic products. Article 8 of EU Regulation 1223/2009 requires cosmetics to be manufactured under good manufacturing practice and presumes compliance where manufacture follows the relevant harmonised standards, and EN ISO 22716 has been listed as that harmonised standard in the Official Journal.

In the US, MoCRA directs FDA to issue cosmetics GMP regulations that are, to the extent practicable and appropriate, consistent with national and international standards. Commentators widely expect ISO 22716 to be the main reference. That rule has not been finalized, so there is no US cosmetics GMP regulation to review against yet. Many US manufacturers already review batch records to ISO 22716 because retailers, EU customers and certification bodies ask for it.

What the review is checking

ISO 22716 is written as guidance, with requirements phrased as what should happen rather than what shall. In practice, auditors and customers read it as a checklist, and the batch record is where most of it becomes visible. A reviewer is confirming two things: that the executed record matches the approved manufacturing and packaging instructions for this product, and that anything which did not match was caught, documented and decided by someone authorized to decide it.

Keep in mind that the standard does not set numerical limits. Your own specifications, formula and instructions supply those, and the review is only as good as the master documents it is checked against.

Where batch record content sits in ISO 22716

Clause

6 Raw materials and packaging materials

What it means for the batch record

Materials used met their acceptance criteria and were released before use

Clause

7 Production

What it means for the batch record

Manufacturing and packaging followed the documented instructions, with the checks each stage requires

Clause

8 Finished products

What it means for the batch record

The finished product met its acceptance criteria before release

Clause

10 Treatment of product that is out of specification

What it means for the batch record

Rejected product was investigated, and any reprocessing approved by the people responsible for quality

Clause

12 Subcontracting

What it means for the batch record

Work done by a contract acceptor is covered by a written agreement and its records are available

Clause

13 Deviations

What it means for the batch record

Departures from instructions were authorized with sufficient data to support the decision

Clause

15 Change control

What it means for the batch record

Any change affecting the batch was approved by authorized personnel

Clause

17 Documentation

What it means for the batch record

Records are complete, legible and kept within your documentation system

Cosmetics batch record review checklist

Materials

  • Every raw material and packaging component identified by lot, and each lot released before use
  • Target and actual quantities recorded for each ingredient, with any difference explained
  • Bulk product identified, and its storage time before filling within the allowed limit

Manufacturing and packaging

  • Equipment and line identified and recorded as clean before use
  • Process parameters such as temperatures, mixing times and order of addition recorded and inside their ranges
  • In-process controls such as pH, viscosity or fill weight recorded with actual results
  • Packaging components and printed materials reconciled, with batch code and expiry or period after opening marking verified

Deviations and release

  • Every deviation documented in or referenced from the batch record, authorized with supporting data
  • Out-of-specification results investigated, and any reprocessing approved by quality
  • Finished product test results complete and inside acceptance criteria
  • Release recorded with the name of the authorized person, the date and a signature

How Litewave fits

Litewave reads paper or electronic records, checks every entry against your master record and specifications, and shows QA only the exceptions, each linked to the page it came from. Litewave proposes, qualified people approve. Our published results come from pharmaceutical manufacturing, at a leading global generic API manufacturer, and we make no claim about cosmetics results or about any future US cosmetics GMP rule.

Questions we get asked

Is ISO 22716 mandatory?

ISO 22716 is a voluntary guideline. In the EU, manufacturing in line with it gives a presumption of compliance with the GMP requirement in Article 8 of Regulation 1223/2009. In the US, it is not a regulation, although customers and certifiers often require it.

Is the MoCRA GMP rule in force?

No. MoCRA directs FDA to issue cosmetics GMP regulations, but the rule has not been finalized. Check FDA directly for its current status rather than relying on earlier projected dates.

Who should release a cosmetic batch?

A person your quality system authorizes to do so, after the batch record and finished product results have been reviewed. ISO 22716 places decisions on rejected and reprocessed product with the people responsible for quality, and release should be recorded with a name, date and signature.

Sources

  1. ISO 22716:2007, Cosmetics, Good Manufacturing Practices
  2. Regulation (EC) No 1223/2009 on cosmetic products, Article 8 (EUR-Lex)
  3. Commission communication listing EN ISO 22716:2007 as a harmonised standard, OJ C 123, 21 April 2011 (EUR-Lex)
  4. FDA, Modernization of Cosmetics Regulation Act of 2022 (MoCRA)
  5. Covington, MoCRA implementation: FDA Spring 2025 Unified Agenda update