← Guides

How should equipment use and cleaning logbooks be reviewed?

By Savi C., Co-Founder · Published Nov 16, 2026

What the regulations require

In the US, 21 CFR 211.67(c) requires records of maintenance, cleaning, sanitizing and inspection, kept as 211.180 and 211.182 specify. Section 211.182 sets the logbook itself: individual equipment logs for major equipment, showing the date, time, product and lot number of each batch processed, with entries in chronological order. The people performing and double-checking cleaning and maintenance date and sign or initial the log. Where cleaning or maintenance is done by automated equipment under 211.68, the person verifying that work signs instead.

There is one exception. Equipment dedicated to a single product does not need an individual log, provided the lots follow in numerical order and are made in numerical sequence. In that case the cleaning, maintenance and use records become part of the batch record. On the batch side, 211.105(b) and 211.188(b)(2) require the batch record to identify the major equipment used, which is what makes a cross-check possible.

EU GMP Chapter 4, paragraph 4.31, asks for logbooks for major or critical analytical testing, production equipment and areas where product has been processed, recording in chronological order any use, calibration, maintenance, cleaning or repair, with dates and the identity of the people who did the work. For active substances, ICH Q7 paragraphs 6.20 and 6.21 set similar expectations, including the traceable sequence condition for dedicated equipment.

Two reviews, not one

A logbook is reviewed in two ways. The first is a review of the log as a record in its own right, usually at a set frequency or when a volume is closed: are entries complete, chronological, signed and corrected properly. The second happens at batch review: does what the batch record says about the equipment agree with what the logbook says. The second review is where most real problems surface, because a log can look perfect on its own and still contradict the batch record that relies on it.

Documentation practice applies to logbooks exactly as it does to batch records. The guide Good documentation practice: how should corrections be made in batch records? covers corrections, and What does ALCOA+ mean for batch records? covers contemporaneous and attributable entries.

Logbook review checklist

The log on its own

  • The log is issued, controlled and paginated, with no missing or removed pages
  • Every use entry shows date, time, product and lot number
  • Entries run in chronological order, with no gaps in time left unexplained
  • Every cleaning and non-routine maintenance entry is signed or initialed and dated by the person who did it and the person who checked it
  • Corrections leave the original readable and are initialed, dated and explained where your procedure requires

Cleaning and status

  • A cleaning entry precedes each product changeover, using the cleaning procedure that applies to that change
  • The clean status was verified before the next use, as 211.67(b)(6) requires an inspection for cleanliness immediately before use
  • Clean and dirty hold times, where your procedures set them, are within limits when calculated from the log times

Maintenance and calibration

  • No use is logged while the equipment was under maintenance, out of calibration or tagged out of service
  • Repairs are followed by whatever release or requalification step your procedure requires before the next use

Cross-check with the batch record

  • The equipment ID in the batch record matches the log entry for that batch
  • Batch start and end times fall inside the use period the log records
  • The previous product and the cleaning recorded before this batch match what the batch record claims
  • Any logbook event during the batch, such as a breakdown or repair, appears in the batch record and has a deviation where one is needed

Common logbook findings and what review should establish

Finding

Batch record cites equipment with no matching log entry

What review should establish

Whether the wrong ID was written, or the log entry was never made, and which record is correct

Finding

Use entry with no cleaning entry before it

What review should establish

Whether cleaning was done and not logged, or not done, and the impact on the batch that followed

Finding

Out of order or back-filled entries

What review should establish

Whether entries were made at the time of the activity, and why the sequence broke

Finding

Cleaning signed by one person where two are required

What review should establish

Whether the verification happened, and whether the procedure was followed

Finding

Use logged during a maintenance or calibration lapse

What review should establish

Whether the equipment was fit for use, and which batches are affected

How Litewave fits

The cross-check is tedious by hand because it spans two documents and often two formats. Litewave reads paper or electronic records, checks every entry against your master record and specifications, and shows QA only the exceptions, each linked to the page it came from, so a mismatch between a logbook and a batch record shows up as a single finding with both pages cited. Litewave proposes, qualified people approve.

Questions we get asked

Does dedicated equipment need a logbook?

Under 21 CFR 211.182, not an individual log, provided batches of that product follow in numerical order and are made in numerical sequence. The cleaning, maintenance and use records must then be part of the batch record instead.

Does routine maintenance have to be logged?

Section 211.182 excludes routine maintenance such as lubrication and adjustments from the log requirement. Your own procedures may still require it, and EU GMP Chapter 4 paragraph 4.31 asks for maintenance and repair to be recorded without that carve-out.

How often should logbooks be reviewed?

The regulations do not set a frequency. Many sites review entries at each batch review and the full log at a fixed interval or when a volume closes. Whatever you choose, write it into a procedure and record that the review took place.

Sources

  1. 21 CFR 211.67, Equipment cleaning and maintenance (eCFR)
  2. 21 CFR 211.105, Equipment identification (eCFR)
  3. 21 CFR 211.180, General requirements for records and reports (eCFR)
  4. 21 CFR 211.182, Equipment cleaning and use log (eCFR)
  5. 21 CFR 211.188, Batch production and control records (eCFR)
  6. EudraLex Volume 4, Part I, Chapter 4, Documentation
  7. ICH Q7, Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients