← Guides

What supplier controls does ISO 13485 require for device manufacturers?

By Savi C., Co-Founder · Published Nov 16, 2026

Purchasing controls now come from the standard

Since the QMSR took effect on February 2, 2026, Part 820 no longer has its own purchasing controls section. Supplier requirements for US device manufacturers now come from ISO 13485 clause 7.4, incorporated by reference, together with clause 4.1.5 where a process is outsourced. FDA inspects against those clauses as incorporated.

Clause 7.4 has three parts. Clause 7.4.1 covers the purchasing process and supplier evaluation. Clause 7.4.2 covers what purchasing information must say. Clause 7.4.3 covers verification of purchased product. Throughout, the standard ties the strength of controls to risk, so the records need to show how you judged risk as well as what you did.

What each subclause requires

Clause

7.4.1 Purchasing process

Requirement

Documented procedures to ensure purchased product conforms to specified purchasing information. Criteria for supplier evaluation and selection based on the supplier’s ability to provide conforming product, its performance, the effect of the purchased product on device quality, and proportionate to device risk

Clause

7.4.1 Monitoring

Requirement

Planned monitoring and re-evaluation of suppliers, with monitoring results feeding re-evaluation, and non-fulfillment of purchasing requirements addressed with the supplier in proportion to risk

Clause

7.4.1 Records

Requirement

Results of evaluation, selection, monitoring and re-evaluation of supplier capability or performance, and any actions arising

Clause

7.4.2 Purchasing information

Requirement

Product specifications, acceptance requirements, supplier personnel qualification and quality management system requirements, as appropriate, checked for adequacy before being sent

Clause

7.4.2 Change notification

Requirement

As applicable, a written agreement that the supplier notifies you of changes to the purchased product before implementing changes that affect its ability to meet purchasing requirements

Clause

7.4.3 Verification

Requirement

Inspection or other activities to ensure purchased product meets requirements, with the extent based on supplier evaluation results and proportionate to risk. When you become aware of changes to purchased product, determine whether they affect production or the device

Supplier file checklist

Selection

  • A documented risk classification for the supplier, based on what it supplies and its effect on the device
  • Evaluation evidence matched to that classification, such as questionnaire, certificate review, first article or audit
  • An approval decision recorded, with the scope of products or processes the supplier is approved for

Purchasing information and agreements

  • Purchase orders or referenced specifications at the current revision
  • Acceptance requirements stated, including certificates the supplier must provide
  • A signed agreement covering change notification before implementation, where applicable
  • For outsourced processes, a written quality agreement under clause 4.1.5

Monitoring and verification

  • Receiving inspection or other verification defined per part, at a level justified by supplier history and risk
  • Supplier nonconformances, late deliveries and certificate errors trended per supplier
  • Re-evaluation performed at the planned interval, using monitoring results
  • Every supplier change notice assessed for effect on the process and the device, with the decision recorded

Where supplier controls tend to break

Two gaps are common. The first is monitoring that exists on paper but does not feed re-evaluation, so a supplier with repeated nonconformances keeps the same verification level. The second is change notification: an agreement is signed, but nobody records the assessment when a notice arrives, or a change is found only when incoming certificates start to look different. Certificates of conformance and analysis are often the earliest signal of a supplier change. For how incoming certificates are checked in pharmaceutical manufacturing, see the guide How should incoming CoAs be reviewed under 21 CFR 211.84?

How Litewave fits

Supplier monitoring depends on reading incoming certificates and receiving records consistently. Litewave reads paper or electronic records, checks every entry against your specifications, and shows QA only the exceptions, each linked to the page it came from. Litewave proposes, qualified people approve, and supplier approval decisions stay with your team. Our published results come from pharmaceutical manufacturing, and device figures will be published only when a device customer has agreed to them.

Questions we get asked

Does ISO 13485 require supplier audits?

Not for every supplier. Clause 7.4.1 requires evaluation criteria proportionate to risk. An on-site audit is one evaluation method, typically used for critical suppliers or where certificates and inspection do not give enough confidence.

Is an ISO 13485 certificate enough to approve a supplier?

Usually not on its own. A certificate is evidence of a quality system, but you still need to show the supplier can meet your specific purchasing requirements, and the certificate’s scope has to cover what it supplies to you.

What if a supplier refuses to sign a change notification agreement?

Clause 7.4.2 asks for the agreement as applicable. If a supplier will not sign, record the risk assessment, increase verification of what it supplies, and consider whether it should remain approved for that part.

Sources

  1. ISO 13485:2016, Medical devices, Quality management systems
  2. FDA, Quality Management System Regulation final rule, 89 FR 7496 (Federal Register)
  3. 21 CFR Part 820, Quality Management System Regulation (eCFR)
  4. Johner Institute, Supplier evaluation, supplier selection, supplier audits
  5. Advisera 13485 Academy, How can ISO 13485 clause 7.4 Purchasing enhance procurement