How do you make certified true copies of paper batch records?
By Savi C., Co-Founder · Published Nov 16, 2026
What makes a copy true
21 CFR 211.180(d) lets records be retained either as originals or as true copies, such as photocopies, microfilm or other accurate reproductions. FDA’s December 2018 data integrity guidance does not give a one-line definition, but it sets the conditions: a copy can serve as a true copy if it preserves the content and meaning of the original record, including the metadata needed to reconstruct the CGMP activity and the static or dynamic nature of the original.
The MHRA is more explicit. A true copy is a copy, irrespective of the media used, that has been verified, by a dated signature or by generation through a validated process, to have the same information as the original, including data describing its context, content and structure. PIC/S PI 041-1 section 7.7 adds that true copies should be authenticated in a way that lets their authenticity be readily verified, through handwritten or electronic signatures or a validated copying process.
For paper batch records the hard part is rarely the copier. It is proving the copy is complete: every page, every attachment, every stuck-on printout and every entry made in the margin or on the back of a page.
Making a true copy of a paper batch record
Based on the steps in the PIC/S PI 041-1 section 7.7 table for creating and receiving a true copy of a paper document.
Before copying
- A written procedure says who may make true copies, with what equipment and settings, and for what purpose
- The original record is complete and reconciled, with page count confirmed against the issuance log
- Attachments, printouts and labels are present and referenced in the record before copying starts
Copying
- Every page is copied in full, including reverse sides that carry entries
- Resolution and colour are enough to read every entry and every crossed-out original value
- Thermal paper printouts, which may fade, are copied to an indelible, signed and dated true copy as PIC/S expects
Verifying
- The copy is compared against the original for completeness and legibility, page by page or by a validated process
- The person verifying signs and dates the copy as a true copy, or the validated process records that it was generated
- Any page that fails verification is recopied, and the failed copy is not used
Controlling
- The copy is clearly marked as a true copy and not an original
- Scans are stored so they are protected from alteration, as PIC/S asks reviewers to check
- A distribution list records every true copy issued, on paper or electronically
Distribution copies and retention copies
PIC/S PI 041-1 treats these two purposes differently.
Purpose
Copy sent to a client, contract giver or sister site
What happens to the original
The record owner keeps the original for its full retention period
Purpose
Copy made to support document retention
What happens to the original
The copy may be kept in place of the original, if a documented system verifies and records the integrity of the copy
Purpose
Working scan used only to review the record
What happens to the original
Not a true copy unless made and verified under the true copy procedure, so the original stays the record
Retiring the paper original
The MHRA says true copies may be retained in place of originals, for example a scan of a paper record, if a documented system is in place to verify and record the integrity of the copy, and that organisations should consider any risk associated with destroying originals. PIC/S PI 041-1 section 8.11 asks for a documented disposal process that destroys the correct records only after their retention period and keeps historical records from drifting back into current use.
Under 211.180(c), records or copies must stay readily available for inspection at the site where the activity happened, and records that can be retrieved immediately by electronic means meet that requirement. If you plan to destroy paper originals, the retrieval system for the copies has to be as dependable as the filing room it replaces. Where a quality agreement covers the transfer of records between companies, PIC/S expects it to set out responsibilities for true copies.
How Litewave fits
Litewave reads paper or electronic records, checks every entry against your master record and specifications, and shows QA only the exceptions, each linked to the page it came from. Whether the scan it reads is a working copy or a controlled true copy is set by your own procedure. Litewave proposes, qualified people approve.
Questions we get asked
Can a validated scanning process replace a signature on each copy?
Yes. The MHRA definition allows verification by a dated signature or by generation through a validated process, and PIC/S PI 041-1 accepts either a signature or a validated process for creating true copies. The validation has to show the process produces complete, legible copies every time.
Is a PDF scan of a paper record a true copy?
It can be, if it is made and verified under your true copy procedure. The PDF caution in PIC/S PI 041-1 applies to copies of electronic data, where a PDF can lose metadata, and not to scanning a paper original that has no metadata beyond what is on the page.
Who should certify a true copy?
The regulations do not name a role. PIC/S describes the person creating the copy verifying it and signing and dating it as a true copy. Your procedure should name the trained roles allowed to do this and keep a record of who certified each copy.
Sources
- 21 CFR 211.180, General requirements for records and reports (eCFR)
- FDA, Data Integrity and Compliance With Drug CGMP: Questions and Answers (December 2018)
- PIC/S PI 041-1, Good Practices for Data Management and Integrity in Regulated GMP/GDP Environments (2021)
- MHRA, GXP Data Integrity Guidance and Definitions, Revision 1 (March 2018)
