← Guides

What does ALCOA+ mean for batch records?

By Savi C., Co-Founder · Published Nov 16, 2026

Where ALCOA+ comes from

ALCOA+ is not a regulation. It is the vocabulary regulators use to describe what the record-keeping requirements already demand. FDA’s December 2018 data integrity guidance defines data integrity as the completeness, consistency and accuracy of data, and says complete, consistent and accurate data should be attributable, legible, contemporaneously recorded, original or a true copy, and accurate.

The MHRA’s GXP data integrity guidance, revised in March 2018, uses ALCOA rather than ALCOA+, and states that there is no difference in expectations whichever acronym is used, because data governance should ensure data is complete, consistent, enduring and available throughout its lifecycle. PIC/S PI 041-1, in force since July 1, 2021, sets out all nine attributes in a table and applies them to both paper and electronic systems.

Each attribute applied to a batch record

Attribute

Attributable

What it means in a batch record

Every entry, check and correction identifies the person or system that made it and when, including who changed an entry and why

Attribute

Legible

What it means in a batch record

Entries are readable and unambiguous, and corrections leave the original value readable

Attribute

Contemporaneous

What it means in a batch record

Each step is recorded as it is performed, not filled in from memory or rough notes at the end of the shift

Attribute

Original

What it means in a batch record

The first capture of the data is kept: the issued form, or the electronic record in its dynamic state, or a verified true copy

Attribute

Accurate

What it means in a batch record

Values are a truthful record of what happened, supported by calibrated equipment, trained people and data review

Attribute

Complete

What it means in a batch record

Nothing needed to reconstruct the batch is missing: every page, every attachment, every printout and, for electronic data, the metadata

Attribute

Consistent

What it means in a batch record

Dates, times, units, rounding and significant figures follow defined conventions, and entries appear in a logical sequence

Attribute

Enduring

What it means in a batch record

Records are in indelible ink or a durable system and survive intact for the full retention period

Attribute

Available

What it means in a batch record

The record can be retrieved in readable form by reviewers, investigators and inspectors whenever it is needed

ALCOA+ checks for an executed batch record

Drawn from the record-level expectations in PIC/S PI 041-1 and FDA’s data integrity questions and answers.

Issuance and reconciliation

  • The record was issued from a controlled master, with a unique identifier logged in an issuance register
  • Pages are sequentially numbered and every issued page is accounted for
  • Any replacement copy was issued through a controlled process with a recorded justification
  • Incomplete or spoiled forms are kept with the record, with the reason they were replaced

Entries and corrections

  • Every entry is signed or initialled and dated by the person who performed the step
  • Times run in a plausible sequence and match equipment printouts and logbooks
  • Corrections are a single line through the original, initialled and dated, with a reason where the change is critical
  • No overwriting, correction fluid or pencil entries inked over afterwards

Checks and attachments

  • Critical steps were witnessed or verified by an independent, designated person at the time
  • Printouts and attachments are original or verified true copies, and each is referenced in the record
  • For electronic or hybrid records, audit trails linked to the batch were reviewed with the rest of the record before release

Audit trails are part of the record

For electronic and hybrid records, FDA treats audit trail review as the equivalent of assessing cross-outs on paper. Its guidance says the people responsible for record review should review the audit trails capturing changes to the data as they review the rest of the record, and where the regulations require data review before batch release, the same frequency applies to the audit trail.

PIC/S PI 041-1 takes the same line: critical audit trails linked to an operation should be reviewed with the other records for that operation, for example before batch release, while non-critical audit trails can be reviewed at a defined frequency during system review.

How Litewave fits

Many ALCOA+ checks are mechanical: is every entry signed and dated, do the times run in order, is every page present, does each correction follow the rule. Litewave reads paper or electronic records, checks every entry against your master record and specifications, and shows QA only the exceptions, each linked to the page it came from. Litewave supports 21 CFR Part 11 electronic records, signatures and audit trails. Litewave proposes, qualified people approve.

Questions we get asked

Is ALCOA+ a legal requirement?

The acronym itself is not written into the GMP regulations. It summarises what regulators expect from the record-keeping requirements that are, and FDA, MHRA and PIC/S guidance all use it to explain those expectations.

Does ALCOA+ apply to paper batch records?

Yes. PIC/S PI 041-1 states that its basic data integrity principles apply to both paper and electronic systems, and it gives specific expectations for paper, including controlled issuance, reconciliation of blank forms and how corrections are made.

Can a page with mistakes be rewritten on a fresh form?

Only under control. FDA’s guidance says incomplete or erroneous forms should be kept as part of the permanent record along with a written justification for their replacement, and PIC/S expects re-issued copies to be recorded and justified.

Sources

  1. FDA, Data Integrity and Compliance With Drug CGMP: Questions and Answers (2018)
  2. MHRA, GXP Data Integrity Guidance and Definitions, Revision 1 (2018)
  3. PIC/S PI 041-1, Good Practices for Data Management and Integrity in Regulated GMP/GDP Environments